Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in San Antonio?
In San Antonio, replacing a garage door torsion spring typically costs between $180 and $340 for a single spring, with most homeowners paying around $250 when you factor in the service call, labor, and the spring itself. The job usually takes 45 to 90 minutes for a trained technician, and at Doyle Garage Doors San Antonio we complete most spring replacements the same day you call. Your exact price depends on the spring’s wire size, whether you have one spring or two, and the door weight.
A snapped torsion spring is the single most common reason a garage door won’t open. The good news: it’s not usually a catastrophic expense. You can keep reading for the full 2026 price breakdown, what drives the cost up or down in the San Antonio market, and how to avoid paying for work you don’t need.
Key Takeaways:
- Single torsion spring replacement in San Antonio: $180 – $340
- Double spring replacement: $280 – $520 (both springs typically wear at the same rate)
- Extension spring replacement: $150 – $280 (found on older doors, common in Alamo Heights and Terrell Hills homes built before 1990)
- Most reputable San Antonio companies, including Doyle Garage Doors, complete the job in under two hours.
- High-tension springs are dangerous. Never attempt this repair yourself.
Spring Replacement Cost Breakdown (2026)
Here’s what you can expect to pay in San Antonio this year, broken down by the line items that appear on a written invoice. We give every customer a written price before work begins, so the number you see below is the number you pay. No surprise fees tacked on at the end.
| Service Component | San Antonio Price Range | Notes |
|---|---|---|
| Torsion spring (single) | $60 – $120 | Price varies by wire gauge, coil length, and spring brand |
| Torsion spring (pair) | $120 – $220 | Recommended when both are the same age; see note below |
| Extension spring (single) | $45 – $85 | Common on pre-1990 doors; two are always replaced together |
| Labor (torsion conversion or replacement) | $90 – $170 | Includes winding, tension setting, balance testing, and cleanup |
| Safety cable replacement (with extension springs) | $25 – $40 | Required by code when replacing extension springs in San Antonio |
| Center bearing plate or end bearing replacement | $30 – $75 | Only if worn; we always show you the part before replacing it |
| Typical total: single torsion spring | $180 – $340 | Most common job in San Antonio |
| Typical total: double torsion spring | $280 – $520 | Both springs usually wear out within 6 months of each other |
| Typical total: double extension spring | $150 – $280 | Older homes in Monte Vista, Alta Vista, and Lavaca |
Now, an honest note about replacing one spring versus two. A garage door with two torsion springs has both springs wound to share the load equally. When one snaps, the other has been under the same fatigue stress for the same number of cycles. You can replace just the broken spring, and we’ll do that if you ask. But you’ll likely be back in the same spot within three to six months. We recommend replacing both at once: it usually saves you a second service call fee, and the labor cost for the second spring is minimal since the technician is already there. We’ll never pressure you, but we’ll always tell you the truth.
One more thing about the San Antonio market specifically. Homes in neighborhoods like Stone Oak, The Dominion, and Cibolo Canyons skew toward newer builds with heavier insulated doors and high-cycle spring setups. Springs on those doors often cost on the higher end of the range because they’re built for a 25,000-cycle lifespan. Homes in mid-century areas like Jefferson, Woodlawn Lake, and Harlandale more often have standard 10,000-cycle springs, which sit at the lower end of the parts cost scale.
What Affects Spring Replacement Pricing in San Antonio
You’ll notice the ranges above have some room in them. Here’s why, specific to what we see across Bexar County every week.
- Spring type and wire size. Torsion springs are sold by wire diameter, inside diameter, and length. A .207 x 2 x 22 spring costs less than a .250 x 2 x 28 spring because it uses less steel and handles less weight. Heavier doors need heavier springs, which cost more.
- Door weight. A single-car steel door weighs 120 to 150 pounds. A double-wide insulated door with glass panels can weigh 300 pounds or more. In neighborhoods like Alamo Ranch and Westcreek, where oversized double doors are standard, expect to pay toward the top of the range.
- Single or double spring system. Two springs cost more than one, even though the labor is similar. If we’re converting an older extension-spring door to a torsion system, there’s additional hardware and time involved.
- Bearing wear. In San Antonio’s heat, grease in the bearing plates dries out faster than in cooler climates. If the bearings are shot, the new spring will wear unevenly. We may recommend replacing the center bearing ($30 – $75) as part of the job, which we’ll show you before we do it.
- Geographic area and service call. Drive times from our shop to far-north neighborhoods like Timberwood Park or far-west areas like Stevens Ranch add modest trip charges. Closer-in jobs around Tobin Hill, Government Hill, and Dignowity Hill are usually at the lower end of the service-fee range.
- Spring cycle rating. Standard springs are rated for about 10,000 open-close cycles. High-cycle springs rated for 25,000 cycles cost $30 to $60 more per spring. If you plan to stay in the home for five or more years, high-cycle is usually the smarter buy. We stock both in the truck.
How to Save on Spring Replacement
You won’t find gimmicks here. These are practical, repeatable ways to keep more money in your pocket without sacrificing safety or quality.
Replace both springs at once. This is the single biggest money-saver. If you only replace the one that snapped, you’ll likely pay a second service call fee within six months. Doing both in one visit costs $280 to $520 total, versus two separate visits at $180 to $340 each. The math favors the pair.
Choose the right cycle rating for your situation. A 10,000-cycle spring might cost less today, but if you park in the garage twice daily, you’re putting roughly 1,400 cycles per year on the door. That standard spring lasts about seven years. A 25,000-cycle spring lasts nearly 18 years at that same pace for about $40 to $60 more per spring. If you plan to stay put, it’s the better long-term buy.
Avoid going too cheap on parts. There are economy springs on the market, usually imported, that we won’t install. A $45 knockoff torsion spring may fail in 18 months and can damage other components when it goes. We source our springs from established manufacturers and back every one with our 365-day written guarantee. That guarantee covers parts and labor for a full year from the repair date. If anything fails in that window, we return and make it right at no charge.
Get a written price before you agree to anything. Every Doyle Garage Doors job in San Antonio includes a line-item quote in writing before we turn a single bolt. No verbal estimate, no handshake math, no invoice surprise at the end. You’ll see the spring price, the labor, the service fee, and any recommended part replacement as its own line. If you don’t want a recommended item, you decline it. The price never moves unless you approve a change.
Ask about a free estimate. Our estimates are free, and they include a basic safety check of your door system. If the spring has snapped, we’ll tell you what needs immediate attention and what can wait. Call (806) 491-1594 any time, day, night, weekends, or holidays. A real person answers. No automated menu, no callback service.
What Happens During a Spring Replacement in San Antonio
Here’s exactly what a spring replacement visit from Doyle Garage Doors looks like, step by step, so there are no surprises when the truck pulls up.
- You call. A live person answers at (806) 491-1594. You describe the problem, and we schedule a service window that works for your day. We also send you the name and photo of the technician who’ll be at your door, along with the vehicle description.
- The technician arrives. The technician shows up in a marked Doyle Garage Doors vehicle, wearing a clean uniform and a photo ID badge. They’ll introduce themselves and verify their identity before stepping inside or into the garage. Every technician is background-checked and identity-verified under the Threshold Standard.
- Inspection and written quote. They’ll inspect the broken spring, check the other spring’s condition, test the door balance, and look at the bearing plates and cables. Then they’ll hand you a written quote with each line item separated: spring cost, labor, service fee, and any recommended replacements.
- You approve or decline. No one begins work until you approve the written quote. If you decline an item, that’s the end of it. No pressure, no upsell script.
- The repair. The technician removes the broken spring, installs the new spring or springs, winds the torsion spring to the correct tension, lubricates the moving parts, and tests the door through several open-close cycles. This typically takes 45 to 90 minutes.
- Balance and safety check. They’ll confirm the door opens evenly, stays in place when stopped mid-travel, and that the auto-reverse safety feature works. They’ll clean up any debris and old parts.
- Guarantee in writing. Before they leave, you’ll receive the written 365-Day Done Right Promise. It covers the spring, the labor, and the repair for 365 days from the date of service. If anything fails in that window, we return and fix it at no charge. That’s included automatically on every repair, at no extra cost.
Why Spring Replacement Prices Vary Between San Antonio Companies
You’ll find garage door companies in San Antonio advertising spring replacement as low as $99. You’ll also see quotes from others at $400 or more. Here’s what’s actually behind those differences, based on 24 years serving Bexar County since our founding in 2001.
Parts quality is the big one. A $99 spring job almost always uses the cheapest imported spring available, rated for maybe 5,000 cycles with no warranty worth the paper. We install springs from established manufacturers that meet or exceed the OEM specs for LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors. The parts cost difference is real, and it shows up in the price.
Labor and insurance. Companies that send uninsured, unvetted workers can undercut everyone on price. We won’t. Every technician who wears the Doyle Garage Doors uniform has passed a background check and identity verification under the Threshold Standard. That verification process costs money, and it’s factored into the repair price. It’s also why we can tell you exactly who is coming to your door before they get there.
The fine print. Some low advertised prices exclude the service call fee, the labor, or assume you’re replacing with the cheapest spring possible. The quote you get over the phone isn’t always the price on the invoice. That’s precisely why we put every quote in writing before any work begins. The price you approve is the price you pay, period.
Guarantee terms. Does the company guarantee the repair for 30 days? 90 days? Not at all? Our 365-Day Done Right Promise is in writing on every repair: 365 days from the date of repair. If the spring fails, we come back and make it right at no charge. If a second visit is needed for the same repair, that’s free too, automatically. No argument, no fine print, no pro-rated formula.
Is It Worth Replacing a Spring, or Should You Replace the Whole Door?
In San Antonio’s climate, a well-maintained garage door lasts 20 to 30 years. A spring replacement costs $180 to $340. A new door with installation runs $700 to $2,200. So the answer is almost always: replace the spring.
The exceptions are rare but real. If your door has rusted-through panels, sagging hinges, a warped frame, or you’ve been repairing it three times a year, the math shifts. Replacement makes sense when the cumulative repairs over the next five years would approach the cost of a new door. We’ll tell you honestly which side of that line you’re on during the inspection, and we’ll show you the condition of every component so you can see it yourself.
What Does San Antonio’s Climate Do to Garage Door Springs?
San Antonio’s heat is hard on mechanical parts. The combination of 95-degree summer days and uninsulated garage spaces means the air inside a typical San Antonio garage regularly exceeds 110 degrees in July and August. That heat accelerates drying in the bearing grease and increases metal fatigue in the spring coils. It’s one reason springs fail more frequently here than in cooler markets like Dallas or Houston, where garages don’t bake the same way all summer.
Humidity plays a role too. Bexar County’s average morning humidity above 80% for much of the year means invisible condensation forms on the spring coils overnight, especially in uninsulated garages in older neighborhoods like Beacon Hill and Alta Vista. Mild surface corrosion follows. It won’t snap a spring by itself, but it gives the fatigue process a head start. Keep the spring lightly lubricated twice a year and it’ll last measurably longer.
San Antonio Permits and Codes for Garage Door Work
Good news: spring replacement does not require a permit in San Antonio or anywhere in Bexar County. It’s classified as routine maintenance. New garage door installation may require a permit depending on the scope, but spring work, cable work, opener repair, and track realignment are all done without city approval. We handle any permit requirement on the rare job that does need one.
One code note worth knowing: if your door uses extension springs, the City of San Antonio requires safety cables to run through the springs. If a spring snaps without a safety cable, the spring can fly across the garage with enough force to cause serious injury or property damage. Our technicians always verify the safety cables are present and intact when working on extension-spring doors, and we’ll install them if they’re missing as part of the repair quote.
FAQs – Spring Replacement Cost
How much does it cost to replace one torsion spring in San Antonio?
A single torsion spring replacement in San Antonio runs $180 to $340 including the spring, labor, and service call. Most jobs land around $250. The final number depends on the spring’s wire size and length, the door weight, and whether your door uses one spring or two. Call (806) 491-1594 for an exact written quote; estimates are free.
Is it cheaper to repair or replace a garage door spring?
Repair is almost always cheaper. Spring replacement costs $180 to $340 for a single spring, while a full door replacement in San Antonio starts at $700 and runs to $2,200 or more. A spring has a design lifespan of 7 to 15 years depending on cycle rating, while the door itself can last 25 years or more. Replace the spring. Call (806) 491-1594 if you’d like us to inspect the door and give you a straight answer.
Can a garage door spring be fixed the same day in San Antonio?
Yes. Doyle Garage Doors San Antonio completes most spring replacements the same business day you call, usually within a few hours depending on the schedule. We carry common spring sizes on the truck, so the technician arrives with the parts already at the curb. Call (806) 491-1594; a live person answers 24/7, including nights, weekends, and holidays.
How long does a garage door spring last in Texas?
In San Antonio’s heat, a standard 10,000-cycle spring typically lasts 6 to 8 years with normal use. A high-cycle 25,000-cycle spring lasts 12 to 18 years. The heat inside an uninsulated San Antonio garage accelerates metal fatigue compared to cooler climates, which is why we stock high-cycle options for the same day. If yours has snapped, call (806) 491-1594 for a same-day written quote.
Should I replace both garage door springs at the same time?
Yes, in most cases. If your door has two springs, they were installed at the same time and have experienced the same number of open-close cycles. Replacing both at once costs $280 to $520, versus $180 to $340 for a single spring now and another service call within six months. You’ll save the second service fee and likely the second labor charge. We’ll always show you the condition of the other spring before you decide.
Why do garage door springs break in San Antonio?
Metal fatigue from repeated cycling is the primary cause; most springs are rated for 10,000 cycles and simply reach the end of that lifespan. San Antonio’s extreme garage heat, which often exceeds 110 degrees inside an uninsulated garage in summer, accelerates the fatigue process and shortens the spring’s life. Morning humidity adds surface corrosion. Regular lubrication twice yearly can add a year or more to a spring’s lifespan.
Call Doyle Garage Doors San Antonio for Your Spring Replacement
A broken spring is not a job to put off, but it’s also not a job to panic over. It’s a routine repair, with a predictable cost, and it should come with a clear written quote before anyone picks up a tool. That’s the standard we’ve held since 2001 as part of the Threshold Group family of home-service companies.
When you call Doyle Garage Doors San Antonio at (806) 491-1594, a live person answers. Day, night, weekend, or holiday. We’ll schedule the visit, send you the technician’s name and photo before arrival, and give you a written price for the spring replacement. The repair is covered by our 365-day written guarantee: if it fails within one year of the repair date, we return and make it right at no charge. And if a second visit is ever needed for that same repair, it’s free automatically. That’s the Spring Replacement in San Antonio standard we’re known for.
You can also explore our home page for more about how we work. When you’re ready, call (806) 491-1594 for a free estimate. We’ll tell you exactly what’s wrong, exactly what it costs, and exactly who’s showing up. Before they get there.
Pricing reflects the San Antonio market as of 2026. Doyle Garage Doors San Antonio offers free estimates – call (806) 491-1594.
Written by Aaron Teague, Owner at Doyle Garage Doors San Antonio, serving San Antonio since 2001.
What Our Customers Say
"Opener kept reversing halfway down. Turned out the safety sensors were out of line and one wire was frayed. Fixed it for a small charge instead of selling me a new unit."
- Roberto F."My wife is home alone during the day, so having a vetted tech with a badge mattered to us. He was polite, wore shoe covers, and cleaned up the old spring pieces."
- Denise P."Solid work on a noisy door. Needed lube, new hinges, and a tension adjustment. Had to wait a few days for the hinges to come in, but they kept me posted."
- Gloria V.